COLLTEX HOTMELT TAPE 150 mm / 4 m
Code: 72982
Related products
Product detailed description
The best way to restore the adhesive layer - we achieve 100% efficiency of the original Hotmelt adhesive. Can be done at home or in a service environment.
We recommend applying the glue to the cleaned surface of the loom (after removing the bad glue with a heat gun + spatula or an old iron).
It is better to use a wooden board wider and longer than the belt, attach the belt to the board, put paper under it and clean it.
We change the paper, stick the foil to the cleaned loom as adhesive tape and iron it for a reasonable amount of time with a clean iron - "LEN" temperature approx. 250 °C.
The transfer paper may turn slightly brown.
Let the belts cool down thoroughly - (depending on the ambient temperature) and then remove the transfer paper.
Due to the need for tools and electricity, we recommend carrying out this renovation at home or in a ski resort. service.
We recommend using the adhesive only on colltex / Contour products.
Additional parameters
| Category: | Skialp accessories |
|---|---|
| Warranty: | 2 years |
| EAN: | 7611818072023 |
| The item has been sold out… | |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!