VOLA Roller Waxer

Product detailed description

• the machine has a roller system that ensures even and smooth distribution of the wax
• it is equipped with digital temperature control that allows precise adjustment
• the roller system is gentle on equipment and eliminates the need to use a hot waxing pad iron
• maximum ski width 150 mm
• tank holds a maximum of 250 g of wax

instructions for use:

The waxing machine casing and wax tank heat up to a high temperature during use and require a long time to cool down even after the power is turned off. Do not touch them directly.

1. Remove the plastic cover of the wax tank before heating.
2. Turn on the main power switch.
3. Press the <SET> button and adjust the temperature setting using the <<UP>> and <DOWN>> buttons.
4. Confirm the setting by pressing the <<ENT>> button, or wait for the temperature digit to flash ten times. Then the machine will start heating.

During heating, the digital display circle will rotate clockwise until the actual temperature reaches the set value. Once the actual temperature reaches the set value, the display will only show the set temperature.

After the wax is completely melted:

• Make sure the liquid wax level does not reach the top rubber roller. If so, remove the excess wax before use.
• Wait until the solid wax is completely melted and the wax temperature is stable.

Note:

The wax should not produce smoke when melting. If smoke appears, reduce the set temperature until the smoke stops.